User`s guide
Table Of Contents
- NETWORK USER’S GUIDE
- Table of Contents
- 1 Introduction
- 2 Changing your machine’s network settings
- 3 Configuring your machine for a wireless network (For HL-2135W, HL-2270DW and HL-2275DW)
- Overview
- Step by step chart for wireless network configuration
- Confirm your network environment
- Confirm your wireless network setup method
- Configuration using the Brother installer application on the CD-ROM to configure your machine for a wireless network
- Configuration using the one-push wireless setting mode to configure your machine for a wireless network (Infrastructure mode only)
- Configuration using the PIN Method of Wi-Fi Protected Setup to configure your machine for a wireless network (Infrastructure mode only)
- Configuring your machine for a wireless network (for Infrastructure mode and Ad-hoc mode)
- 4 Wireless configuration using the Brother installer application (For HL-2135W, HL-2270DW and HL-2275DW)
- 5 Control panel setup
- 6 Web Based Management
- 7 Security features
- 8 Troubleshooting
- Appendix A
- Index
Troubleshooting
40
8
Are you connecting the
Brother machine to the
network using wireless
capabilities?
wireless Print the WLAN report for confirm the state of the wireless connection.
(For how to print, see Printing the WLAN report (For HL-2135W,
HL-2270DW and HL-2275DW) on page 29.)
If there is an error code on the printed WLAN report, see Troubleshooting
in the Quick Setup Guide.
See The Brother machine is not found on the network during the printer
driver installation. on page 37.
I have checked and tried all
of above, however the
Brother machine does not
print. Is there anything else I
can do?
wired/
wireless
Uninstall the printer driver and reinstall it.
I'm using security software.
Question Interface Solution
Did you choose to accept
the security alert dialog
during the printer driver
installation, applications'
start-up process or when
using the printing features?
wired/
wireless
If you did not choose to accept the security alert dialog, the firewall function
of your security software may be rejecting access. Some security software
might block access without showing a security alert dialog. To allow access,
see the instructions of your security software or ask the manufacturer.
Note
Allow access when the alert message to block the following programs of
the security software appears during the installation.
BrYNsvc.exe
Brother Status Monitor (Network)
Generic Host Process f…
Setup.exe
Spooler SubSysytem App
I want to know the
necessary port number for
the security software
settings.
wired/
wireless
The following port numbers are used for Brother network features:
Network printing i Port number 137 / Protocol UDP
BRAdmin Light i Port number 161 / Protocol UDP
For details on how to open the port, see the instructions of the security
software or ask the manufacturer.
The Brother machine cannot print over the network.
The Brother machine is not found on the network even after successful installation. (continued)
Question Interface Solution