User guide

Gateway Settings 74
5. You can make changes to any of these fields. When you finish, click Submit.
The following information is displayed.
Item
Description
UPnP
UPnP
Current state of the Universal Plug and Play feature (On or Off). (See
UPnP (Universal Plug and Play).)
LAN
IP Address
The routing hardware’s IP address on the LAN.
Netmask
The routing hardware’s internal LAN subnet mask.
DHCP Server
This field enables (On) or disables (Off) DHCP. See DHCP.
DHCP IP Range
This specifies the starting and ending address of the range of IP
addresses available for your device to dynamically (that is, not
permanently) assign to computers connected to it. See
DHCP.
DHCP Lease Time
This is the amount of time, in minutes, a computer can use its assigned
IP address before it is required to renew the lease. After this time is up,
the computer is automatically assigned a new dynamic IP address. See
DHCP.
Enter a number between 2 and 10080.
DNS Mode
This specifies how the DNS servers (that the DHCP clients are to
communicate with) are obtained.
Manual: The routing hardware assigns DHCP clients the DNS servers
specified in the DNS 1 and DNS 2 fields.
Use this option to access a DNS server that provides customized
addressing or if you have a local DNS server on your network.
Note: The DNS 1 and DNS 2 fields appear only if DNS Mode is Manual.
Auto: The DNS server specified by Sprint is used.
DMZ
DMZ On/Off
Enable / disable demilitarized zone.