User guide

Gateway Settings 61
The following information is displayed.
Item
Description
Download /
Backup
Click Save to make a copy (export) of the gateway’s current
configuration, so that you can restore it later if needed. See Exporting
Settings.
Restore Settings
Click Choose file to use a previously saved copy of your device
configuration. See Importing Settings.
Software Update
Click Check for update to see if a new version of software has been
released and if there is, download and install it. The last time you
checked is shown on the screen (Last checked at). See
Update the Software and Firmware.
Note: Software downloads count against your plan’s data limit.
Firmware Update
Click Upload to see if a new version of your device’s firmware has been
released, and if there is, download and install it.
Factory Reset
Click to reset your device to factory default settings and clear your
account details. See Reset the Gateway to Factory Default Settings.
(You can do this only with assistance from Sprint.)
Reset
Settings Reset. Click to reset your device to factory default settings, but
leave your Sprint account details unchanged. See
Reset Device Settings Only.
Clear Programming. Click to clear your account details. See
Clear Account Details Only.
System Logs
Technical support staff may need you to configure system logging in this page for the purpose
of error diagnosis.
Note: You should adjust settings on this page only under the direction of technical support staff.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)