Use and Care Manual

ManualsBrandsMOD ManualsOutdoor Lounge ChairsWilla Steel Outdoor Hanging Egg Chair with Gray Cushions

1

2

3

4

5

6

7

GCS09062H

3

Egg Chair Assembly

Step 1:

• Connect left base (A) and right base (B) by

using post plastic part (T) and connection

part (U). Using the M6x15 combination bolt

and washer (L), lightly tighten the bolts using

the hex key (V).

• Line up the bolt holes on the end of the left

base (A) with the corresponding bolt holes

on the right base (B). Using M8x25

combination bolt and washer (I), M8

washer(O) and M8 spring washer (P), M8 nut

(Q), lightly tighten the bolts using the hex key

(V)and wrench (W).

• Tighten all bolts.

Step 2:

• Attach the lower hanging bar(C)to the left

base(A)and right base(B)by lining up the

bolt holes on the lower hanging bar(C)with

the corresponding bolt holes on the left

base(A)and right base(B).

• Using M8x30 combination bolt and

washer(J),M8 washer(O),M8 spring

washer(P)and M8 nut(Q),lightly tighten all

bolts using the hex key(V)and wrench(W).

• Using M8x15 bolt (H),M8 spring

washer(P),M8 washer(O),lightly tighten all

bolts using the hex key(V).

• Tighten all bolts.