SDS

ACGIH Biological Exposure Indices
ValueComponents Determinant Specimen Sampling Time
1.5 g/g Methylhippuric
acids
Creatinine in
urine
*
XYLENE (CAS 1330-20-7)
* - For sampling details, please see the source document.
Exposure guidelines
US - California OELs: Skin designation
PROPYLENE GLYCOL METHYL ETHER ACETATE
(CAS 108-65-6)
Can be absorbed through the skin.
TOLUENE (CAS 108-88-3) Can be absorbed through the skin.
US - Minnesota Haz Subs: Skin designation applies
TOLUENE (CAS 108-88-3) Skin designation applies.
Appropriate engineering
controls
Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates
should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,
or other engineering controls to maintain airborne levels below recommended exposure limits. If
exposure limits have not been established, maintain airborne levels to an acceptable level. Eye
wash facilities and emergency shower must be available when handling this product.
Individual protection measures, such as personal protective equipment
Eye/face protection
Wear safety glasses with side shields (or goggles).
Skin protection
Hand protection
Wear appropriate chemical resistant gloves. Suitable gloves can be recommended by the glove
supplier.
Other
Wear appropriate chemical resistant clothing.
Respiratory protection
If permissible levels are exceeded use NIOSH mechanical filter / organic vapor cartridge or an
air-supplied respirator.
Thermal hazards
Wear appropriate thermal protective clothing, when necessary.
General hygiene
considerations
When using do not smoke. Always observe good personal hygiene measures, such as washing
after handling the material and before eating, drinking, and/or smoking. Routinely wash work
clothing and protective equipment to remove contaminants.
9. Physical and chemical properties
Appearance
Physical state
Liquid.
Form
Aerosol. Liquefied gas.
Color
Not available.
Odor
Not available.
Odor threshold
Not available.
pH
Not available.
Melting point/freezing point
-305.68 °F (-187.6 °C) estimated
Initial boiling point and boiling
range
-43.78 °F (-42.1 °C) estimated
Flash point
-156.0 °F (-104.4 °C) estimated
Evaporation rate
Not available.
Flammability (solid, gas)
Not applicable.
Upper/lower flammability or explosive limits
Flammability limit - lower
(%)
1.3 % estimated
Flammability limit - upper
(%)
12.8 % estimated
Explosive limit - lower (%)
Not available.
Explosive limit - upper (%)
Not available.
Vapor pressure
2007.91 hPa estimated
Vapor density
Not available.
5 / 12
Material name: MODPODGE ACRYLIC SEALER 1470
02536 100161 604 Version #: 01 Issue date: 04-11-2015
SDS US