SDS

Response
If on skin: Wash with plenty of water. If inhaled: Remove person to fresh air and keep comfortable
for breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses,
if present and easy to do. Continue rinsing. If exposed or concerned: Get medical
advice/attention. Call a poison center/doctor if you feel unwell. If skin irritation occurs: Get medical
advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated
clothing and wash before reuse.
Storage
Store in a well-ventilated place. Keep container tightly closed. Store locked up. Protect from
sunlight. Store in a well-ventilated place. Protect from sunlight. Do not expose to temperatures
exceeding 50°C/122°F.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations.
Hazard(s) not otherwise
classified (HNOC)
None known.
Supplemental information
45.73% of the mixture consists of component(s) of unknown acute hazards to the aquatic
environment. 45.73% of the mixture consists of component(s) of unknown long-term hazards to
the aquatic environment.
3. Composition/information on ingredients
Mixtures
CAS number %Common name and synonymsChemical name
67-64-1ACETONE
30 to <40
106-97-8N-BUTANE
10 to <20
74-98-6PROPANE
10 to <20
108-65-6PROPYLENE GLYCOL METHYL
ETHER ACETATE
5 to <10
108-88-3TOLUENE
5 to <10
1330-20-7
XYLENE
5 to <10
Other components below reportable levels 5 to <10
100-41-4ETHYLBENZENE
1 to <5
*Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret.
4. First-aid measures
Inhalation
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON
CENTER or doctor/physician if you feel unwell.
Skin contact
No adverse effects due to skin contact are expected. Remove contaminated clothing. Wash with
plenty of soap and water. If skin irritation occurs: Get medical advice/attention. Wash
contaminated clothing before reuse.
Eye contact
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists.
No specific first aid measures noted.
Ingestion
Not likely, due to the form of the product. In the unlikely event of swallowing contact a physician or
poison control center. Rinse mouth.
Most important
symptoms/effects, acute and
delayed
May cause drowsiness and dizziness. Headache. Nausea, vomiting. Severe eye irritation.
Symptoms may include stinging, tearing, redness, swelling, and blurred vision. Skin irritation. May
cause redness and pain. Prolonged exposure may cause chronic effects.
Indication of immediate
medical attention and special
treatment needed
Provide general supportive measures and treat symptomatically. Keep victim under observation.
Symptoms may be delayed.
General information
IF exposed or concerned: Get medical advice/attention. If you feel unwell, seek medical advice
(show the label where possible). Ensure that medical personnel are aware of the material(s)
involved, and take precautions to protect themselves. Show this safety data sheet to the doctor in
attendance.
5. Fire-fighting measures
Suitable extinguishing media
Alcohol resistant foam. Water fog. Dry chemical powder. Carbon dioxide (CO2).
Unsuitable extinguishing
media
Do not use water jet as an extinguisher, as this will spread the fire.
Specific hazards arising from
the chemical
Contents under pressure. Pressurized container may explode when exposed to heat or flame.
During fire, gases hazardous to health may be formed.
2 / 12
Material name: MODPODGE ACRYLIC SEALER 1470
02536 100161 604 Version #: 01 Issue date: 04-11-2015
SDS US