Item Code-FL03-70-110 Assembly Instructions
ATTENTION: Is your product damaged or missing assembly instructions? DO NOT RETURN!!!PLEASE READ THE FOLLOWING!!! For Replacement / Missing Parts: www.modarte.com/parts For Assembly Instructions and Assembly Videos:https://modarte.com/assembly/ All other enquiries, please send email to: operations@modarte.com or 973-264-1228 IF YOU ARE MISSING PARTS, OR PARTS ARRIVED DAMAGED: For fastest service, please contact us and we will mail you replacements parts the next business day.
Approximate time : 30 Minutes Surface should be uniform during assembly process. While door assembly ,ensure gap on all Four sides are equal. Mallet can be used to drive in dowel.
HARDWARE LIST A 8x40mm Wooden Dowel 16 pcs B 6x35mm Minifix twister 8 pcs C 15x12mm Minifix Roster 8 pcs D 15mm Minifix Cap 8 pcs E 6x50mm Shoulder Screw 8 pcs F 3x16mm Screw 44 pcs G 8x5x16mm Shef support pins 8 pcs H 8x5x16mm Glass Holder I J Door Magnetic 2 pcs Door Handle 4 pcs catcher with Removal plate 5x25mm 4 pcs Screw K Door Handle 2 pcs L Door Hinge 2 Set M 5x10mm PVC Sleeve 44 pcs N 8x13mm PVC Sleeve 8 pcs Glue tube 1 pcs O Note: PVC SLEEVE AND
TL 1 TL 6 TL 5 TL 4 TL 3 TL 7 TL 8 TL 7 TL 9 TL 10 TL 9 TL 2 TL 11 TL 12 TL 11 TL 11 TL 11 TL 1 TL 14 TL 13
Step 1 F F I Attach Door Stopper (I) to part (TL1) using screw (F) with Screw Driver. Remove magnetic catcher plate for further use. Step 2 Attach Minifix Twister(B) to part (TL1) with Screw Driver.
Step 3 TL 11 F GROOVE SIDE TL 11 TL 2 TL 11 TL 11 TL 12 LEG FRONT SIDE Check direction of leg while fixing follow the above pic along side and use screw(F) with screw driver.
Step 5 TL 3 TL 4 E E TL 2 TL 5 E E E TL 6 E E E E Attach parts (TL3,TL4,TL5,TL6) to part (TL 2) using screw(E).
Step 7 TL 1 TL 7 TL 8 TL 3 TL 6 TL 5 TL 7 TL 4 TL 2 Attach part (TL 1) to parts (TL3,TL4,TL5,TL6) then insert and secure Minifix Roster © to parts (TL3,TL4,TL5,TL6) to lock it.
Step 9 TL 1 G G TL 3 G TL 4 TL 8 TL 7 TL 6 G G G TL 5 TL 7 TL 2 Insert shelf support pins(G) into (TL3,TL4,TL5,TL6) panel. Step 10 TL 1 TL 5 TL 4 TL 9 TL 3 TL 9 TL 6 TL 2 Place shelf on (TL9,) on top of support pins.
Step 11 TL 1 TL 5 TL 9 TL 4 TL 8 TL 6 TL 9 TL 3 TL 2 After shelf placement diagram Step 12 TL 14 TL 13 F I F I J J K J K J Attach handle (K) to parts (TL13,TL14) using handle screw(J) with screw driver and also magnetic catcher plate (I) with screw (F). Detail Steps 1.Insert screw in one of the hole meant for door handle and turn 1-2 thread only. 2.Insert screw in another hole in door, match the hole in handle and turn 1-2 threads in handle. 3.
L Step 13 F TL 1 TL 3 TL 9 TL 4 TL 13 TL 5 TL 2 TL 9 TL 6 Fix (L) as shown in diagram using (F) screw. Hinge Setting Required for Proper Door Closure. Step 14 TL 1 TL 9 TL 14 TL 5 TL 2 TL 3 TL 9 TL 4 L F Fix (L) as shown in diagram using (F) screw. Hinge Setting Required for Proper Door Closure.
Step 15 TL 1 TL 5 H H TL 3 TL 13 TL 14 H TL 8 H TL 2 TL 4 Insert glass holder(H) into part (TL4,TL5) Step 16 TL 1 TL 5 TL 13 TL 8 TL 3 TL 10 TL 2 TL 4 Insert part (Tl10) over glass holder (H) into part (TL4.
Step 17 FINAL ASSEMBLY TL 1 TL 8 TL 13 TL 10 TL 3 TL 2 TL 5 TL 14
