Co. Ltd. Modem User Manual

CDM-570/570L Satellite Modem with Optional IP Module Revision 4
Front Panel Operation MN/CDM570L.IOM
6–10
(CONFIG, REMOTE, ETHERNET, SNMP) Traps
If Traps is selected, the following sub-menu is displayed:
If Community is selected, the following sub-menu is displayed.
Edit the SNMP Read or Write Community string using the
◄ ► and ▲ ▼ arrow keys. Only the first 20 characters on the
bottom line are available. The cursor selects the position on the
bottom line (
◄ ►)and the character is then edited (▲ ▼). All
printable ASCII characters are available with the exception of
the backslash (ASCII code 92) and ~ (ASCII code 126). When
the user has composed the string, press ENTER. All trailing
spaces are removed from the Community string upon entering.
If Version is selected, the following sub-menu is displayed.
Select SNMPv1 or SNMPv2 using the
◄ ► then, press
ENTER.
If IP Addr#1 is selected, the following sub-menu is displayed.
If IP Addr#2 is selected, the following sub-menu is displayed.
These two IP Addresses are Trap Destination’s IP Addresses.
Edit the IP Address by using the
◄ ► and ▲ ▼ arrow keys. If both Trap IP Address are
000.000.000.000, it means Trap is disabled.
Traps: Community Version
IP Addr#1 IP Addr#2 (◄ ►)
Trap Community: (
◄
►,▲ ▼)
comtech
Trap Version:
SNMPv1 SNMPv2 (◄ ►,ENT)
Trap IP #1: (
◄
►,▲ ▼)
000.000.000.000
Trap IP #2: (
◄
►,▲ ▼)
000.000.000.000