User manual

APPENDIX A – TECHNICAL CHARACTERISTICS
17
ENGLISH
APPENDIX A – TECHNICAL CHARACTERISTICS
SUMMARY TABLE
Device REVERSE OSMOSIS WATER DEMINERALIZER
Model
MILLDROP
Manufacturer
C.M.F. S.r.l.
Via E.Ellero, 9
33080 Cusano di Zoppola (PN [=Province of Pordenone]) -
ITALY
for
M.O.COM. S.r.l.
Via delle Azalee, 1
20090 Buccinasco (MI [=Province of Milan]) – ITALIA
Power supply voltage
220 – 240 V ~
Mains frequency
50 Hz
Mains fuses
2x F 3,15A 250V
Fuse on the electronic board
T 3,15A 250V
External size (LxHxD) 220 x 235 x 415 mm (rear connections excluded)
Nominal power
130 W, 2A max
Insulation class
Class I
Utilization
Internal use
Environment operating conditions
Temperature: +15°C ÷ +35°C
Relative humidity: 90% non-condensing
Net weight
14 Kg
Inlet flow rate
minimum 100 lt/h
Outlet flow rate
25 lt/h
Inlet pressure
1 ÷ 4 bar
Working pressure
Max 10 bar (at pump outlet)
Tap water temperature
+10°C ÷ + 35°C
Resin filter cartridge life (average value) about 500 l (depending on the quality of the inlet water)
Osmotic membrane and active carbon filter
life (average value)
about 800 l (depending on the quality of the inlet water)