User manual

PRODUCT
4
PRODUCT
INFORMATION
INTRODUCTION
“MILLDROP” is M.O.COM.’s proposal in the field of water demineralization for water steam
sterilizer.
It is a sophisticated apparatus but easy to use, and adaptable to the user requirements by
means of different installation possibilities.
Thanks to the reverse osmosis membrane and resin filter, the equipment “transforms” the
water coming from water works into qualitatively excellent demineralized water.
“MILLDROP” – which is considerably easy to use and small in size - represents the ideal
equipment to be put next to any water steam sterilizer.
GENERAL
FEATURES
“MILLDROP” is a water demineralizer based on the reverse osmosis principle.
The equipment includes:
- active carbon filter, having a duration of about 800 liters of demineralized water
produced;
- two resin filters having a duration of about 500 liters of demineralized water
produced,
- osmotic membrane which, if regularly checked, can last more than 800 liters of
demineralized water produced.
NOTE
THE LIFETIME OF FILTERS AND OSMOTIC MEMBRANE DEPENDS ON THE QUALITY OF
THE WATER FEEDING THE
MILLDROP.
The limit values for the feeding water are reported in the following table:
Element/Feature Value
Turbidity < 1 NTU
Cholrine < 0.1 ppm
Ph 2-11
Salt density < 5 SDI
Specific conductivity at 20°C < 1000 µS/cm
Iron < 0.1 ppm
Temperature < 35°C
Total hardness < 30°F
NOTE
F
OR A SPECIFIC HARDNESS HIGHER THAN 25°F, THE USE OF A RESIN SWEETENER
AND SALTS REGENERATION IS RECOMMENDED
; THIS IS REQUIRED IF THE
HARDNESS IS HIGHER THAN
30°F.
The equipment operation is controlled by an electronic board which also monitors any
alarm (leak and lack of water, quality of the output water, etc.).
“MILLDROP” may be installed on a work plane, hung to a wall or set inside the washbasin
piece of furniture.
“MILLDROP” offers different installation possibilities:
- direct connection to the sterilizer series Millennium (provided with automatic filling
feature and start/stop interface);
- direct connection to an external tank with automatic water filling feature (possibility to
connect up to 3 sterilizers);
- direct connection to a drawing tap (provided with electric button), to fill manually little
tanks.
For extra details please refer to chapter “Hydraulic connections”.