Specifications
6. CONFIGURATION
36
Adjusting the
contrast of the liquid
crystal display
(LCD CONTRAST on the
SPECIAL menu)
The LCD contrast adjustment allow to obtain the screen reading as clear as possible,
compensating different sterilizer positioning or ambient brightness.
When LCD CONTRAST is activated, this screen appears:
ADJUSTMENT OF THE
LCDCONTRAST
+/‐to set
⇑ to exit
Press the + key increases the contrast while the - key decreases it.
Place yourself in your usual working position and adjust the contrast until the display is as
clear and readable as possible.
EXIT THE
CONFIGURATION
MODE
Completed the sterilizer configuration, proceed as follows to return in normal mode:
– Go to the first-level menu
(see the SETUP layout).
NOTE
T
O RETURN TO THE FIRST LEVEL FROM ANY CURRENT MENU LEVEL, JUST SELECT ITEM
EXIT OF THE CURRENT MENU AND CONFIRM BY ↵ KEY.
A
LTERNATIVELY, YOU CAN PRESS ⇑ (ESC) KEY ONE OR MORE TIMES.
– Select EXIT and confirm with the ↵ key.
This text appears on the display:
MILLENNIUM B+
SETUPCOMPLETE
↵ to exit
⇑ to resume
After several seconds, the device returns to normal operation
in STAND-BY mode.