Specifications

6. CONFIGURATION
30
5. Depending on the selection (SHORT or LONG) one of two different menus will open (these
menus are the same for the standard cycles), i.e.:
In SHORT mode the following is displayed:
→  STANDARD DRYING+ 
FAST DRYING↑ 
EXIT↓ 
‐

In LONG mode the following is displayed:
→
 STANDARD DRYING+ 
INTELL. DRYING↑ 
EXTRA DRYING↓ 
EXIT‐

For the choice criteria, refer to the instruction of page 26.
NOTE
WHENEVER THE CUSTOM PROGRAM IS ALREADY PRESENT IN ANOTHER POSITION, THE
SELECTION IS NOT ACCEPTED
. THE FOLLOWING WARNING APPEARS ON THE DISPLAY,
ALONG WITH A BEEP

THIS PROGRAM IS
ALREADYPRESET


NOTE
T
HE SELECTION CAN BE CHANGED AT ANY TIME BY FOLLOWING THE PROCEDURE
DESCRIBED ABOVE
.
T
HE LIST OF AVAILABLE PROGRAMS, THEIR SCREENS AND THE CHARACTERISTICS OF
STERILIZABLE MATERIALS
(IN RELATION TO THE PROGRAMS) ARE CONTAINED IN
APPENDIX B (PROGRAMS).
A
CCESS TO A CUSTOM CYCLE DOES NOT REQUIRE A PASSWORD. NONE OF THE
COMBINATIONS POSSIBLE IN THE CUSTOMIZATION PHASE CREATE ANY RISKS OR
DANGERS OF INJURY TO THE OPERATOR OR DAMAGE TOT HE DEVICE
.