Full Product Manual

WWW.WOLFGANGMOCK.COM

GETTING STARTED

Important – When using your Mockmill for the first time, mill a

cup of grain or rice at varying grades, then discard the result-

ing flour. This will remove any loose minerals, inherent in the

manufacturing process, from the stones.

To start milling, with Mockmill properly attached to the stand mixer

simply:

1. Push the ﬂ our chute down so that it is pointed into the

mixer bowl

2. Select your desired milling grade. (You can adjust the dial

again once the milling begins if the initial grade is not what

you desire)

3. Load the amount of grain you wish to mill into the hopper

4. Turn on the stand mixer

Note:

You’re free to add your other ingredients to the ﬂ our ﬂ owing into the

mixer bowl during the milling process.

Also, you may interrupt and restart the milling process at any time by

simply switching the mixer off and on again.

Careful:

When using a stand mixer with a tilting head, be aware that grain left

in the hopper will be spilled when the head is tilted! To empty the

hopper of grain no longer intended for milling, simply remove the

Mockmill from the stand mixer and empty the hopper contents into

an appropriate receptacle.