Manualshelf

Full Product Manual

ManualsBrandsMockmill ManualsAppliancesStone Grain Milling Attachment for Stand Mixers
12345678910
10
WWW.WOLFGANGMOCK.COM
ASSEMBLY / SET- UP
A: Move the Mockmill adjustment dial towards fi ne so that the
mill no longer turns by hand.
B: Loosen the knob on the stand mixer and remove the
attachmenthub cover.
C: Insert the Mockmill grain mill attachment into the attachment
hub, aligning the power shaft with the square hub socket.
D: Rotate the attachment back and forth to fi nd the fi t if neces
sary.
E: When the Mockmill is in its proper position, the pin on the
attachment housing will fi t into the notch on the hub rim.
F: Using the extra-long knob screw delivered with the Mockmill,
tighten it as fi rmly as you can. Make certain that the unit is
completely secured to the stand mixer.