User manual

The MFA+ provides a Bluetooth menu that
allows for the control of Bluetooth devices
that the mObridge is paired with. You can
view the list of devices and delete individual
devices from the device list.
Accessing the Bluetooth Menu using the
steering wheel controls.
01
Use the and/or buttons on the
steering wheel to enter the telephone
menu.
02 If the phone is connected, you will need
to press the button to access the main
phone menu.
03 Use the button to scroll down and
select Bluetooth from the menu, and
select it with the button.
The Bluetooth menu shows a list of all
connected devices. Select a device and press
enter, and a sub-menu will appear with
various options.
Bluetooth Device Control
Applies to vehicles: with MFA+ in the
combi-instrument.
Deleting a Bluetooth Device
01
Access the Bluetooth menu using the
directions above.
02 Select a Bluetooth device, and use the
button to open the sub-menu.
03 Using the button, scroll down to Delete
to delete the device.
04 A conrmation screen will appear.
Select Delete again and the device will
be deleted.
'%44).'34!24%$
",5%4//4(&/26/,+37!'%.-!.5!,
OPERATION: COMBI-INSTRUMENT DISPLAY
16
Changing System Settings
Applies to vehicles: with MFA+ in the
combi-instrument.
It is possible to change some of the system
settings of the mObridge system. Settings
are available in the System->Settings menu
on the MFA+.
The settings can be changed even when no
phone is connected.
System Settings Options
Mic Gain 01 - 15
Controls the volume of the microphone
audio from the mObridge system.
Call Volume 01 - 15
Volume level during a call.
Ring Volume 01 - 15
Volume level of the internal ring.
This is used if your phone does not
send the ringtone via Bluetooth.
Beep Volume 01 - 15
Volume level of prompt beeps.
A2DP Volume 01 - 63
Volume level of ringtones if your
phone sends them via A2DP (not
all phones provide this functionality).
Language
Sets the operating language.