User manual
PAGE 04
CONNECTING YOUR PHONE
Connecting your phone to mObridge Bluetooth
Phone pairing
Before you can use your mobile phone with mObridge
Bluetooth, you will rst need to pair it with your mObridge
unit. By pairing your phone with mObridge, you create a bond
between the devices that allows mObridge to automatically
connect to your phone, download the phonebook, make calls.
Pairing your phone with mObridge is a simple operation. The
pairing process is done using your mobile phone.
Note: mObridge can support a maximum of 5 paired
devices. If you want to pair a 6 device, the 5th paired device
will automatically be deleted.
Note: Bluetooth re-connection time may take longer if
more than one device is currently paired to the unit.
01 Turn on your vehicle’s ignition so that the head unit
system is powered
02 Using your phone, start a search for Bluetooth devices.
03 mObridge should show up as a found device on your
phone.
04 Using your phone, pair with mObridge. The passkey
will be “1234” unless mObridge has been congured
to use a different passkey by the installer.
05
mObridge will now be paired with your device. For some
phones you will now need to connect to mObridge
manually the rst time using your phone, but in most
cases mObridge should now automatically connect
to your phone.
06 Your phone and phonebook should now be accessible
on your head unit!
Consult your phone’s user manual for pairing instructions
specic to your phone.
Deleting paired devices
At any time you can view your list of paired devices in
the CD6 Bluetooth menu (mObridge Combo only). A
currently connected device will be marked with an asterisk
next to its name.
To delete a paired device via CD6 menu (mObridge Combo
only) navigate to the Bluetooth->Delete Device menu in
CD6 of your disk changer.
After turhing off Bluetooth on your phone, select “Delete
<phone menu> from the fake phonebook on your radio
and press “dial”.