System information
65/118
Managing Transponders
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
6. As soon as the flashing pattern stops, setup for the new admin card is finished.
You are now back in configuration mode (the OK/MENU button lights up blue).
Press the ESC/ALARM button to exit. After 60 seconds, the mode is exited automatically.
7. To check the transponder number of the new admin card, hold it up to the keypad
and make a note of the number. Press the “2“ button (c = card) until you hear the
second beep and then hold the new admin card up to the keypad.
Note
In case of a wrong entry, cancellation of entry via the ESC/ALARM button, or a delay
of more than 60 seconds, a low warning tone is sounded and the system reverts to
the regular operating mode (all buttons light up white). If required, re-enter into Add
mode as described above.
ESC