System information

45/118
Step 3: Configure The System Via A Videophone
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
2.3.4 Set Door Status Display
To ensure that the status of the entrance door is displayed on the videophone,
• A door contact (door opened/closed) and a door lock switch (door lock locked/
unlocked) must be connected to the T24-DoorMaster or the keypad (see Part 1 of
the System Manual– Installation)
•
And the installed door sensor connection options must be set correctly on the Admin
Setup menu.
Set Door Status Display:
1. On the Admin Setup menu, press 4 to select the Door sensors menu item.
2. Select the required connection option for the door contact and door lock switch
by repeatedly pressing 1 and 2, respectively.
3.
Confirm your selection or cancel (“#“ button). You are still on the Admin Setup menu.
Proceed to Section 2.3.5. and continue with the initial startup.