System information

35/118
Step 2: Setting Up The Keypad
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
Switch On Add Mode Again (If Necessary):
1. Switching on Configuration mode: Press the OK/MENU button until you hear the
second beep (button flashes blue).
2. Hold your admin card up to the keypad buttons until the OK/MENU button lights
up blue continuously.
3. Switching on Access Configuration mode: Briefly press the blue key button, which
then lights up blue.
4. Entering Add mode: Press the OK/MENU button until you hear the second beep
again (button lights up blue again).
hold (2nd beep)
OK
hold (2nd beep)
OK