System information
23/118
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
What Can I Do With My Door Station Now?
All the most important door station functions are now available:
• The bell button on the camera module and on the keypad (if present) are working.
• All the door station modules, including the T24-DoorMaster and videophones, are
integrated and the basic settings have been configured.
• The live image of the master door camera is automatically displayed when you pick
up the receiver on a Grandstream videophone.
•
Two-way communication between the camera module and remote stations is initiated
by pressing “7“ on the videophone.
• You can open the door conveniently via a remote station, provided an electrical door
opener has been connected.
• The basic settings for voice mailbox has also been configured. If no one responds to
the door bell within 30 seconds (no one picks up the receiver and opens the door),
the visitor is asked to leave a message, which is recorded by the camera module
and can be played back later via the keypad or a videophone.
How Should I Hold A Transponder Card Up To The Keypad?
When setting up a transponder card, you should ideally hold the card between the thumb
and index finger of one hand and move it as close as you can to the keypad until a beep
sounds. Make sure that the card does not touch and inadvertently trigger any of the buttons.
During daily operation, you can usually gain keyless access by holding your user card up
to the keypad while it is still in its protective case or in your wallet.
How Can I Protect My Door Station Against Unauthorized Access?
You can now leave the outdoor station and complete the initial system startup by protecting
your system against unauthorized external access (see Sections 2.3 and 2.4).