System information

100/118
T24 System Manual Part 2: System Expansion With MxEasy
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
Step 5: Integrating Door Stations Over The Internet In MxEasy
Launch MxEasy as described in Section 4.1. You now have to manually add the T24 in
MxEasy using your DynDNS name:
1. If this is not automatically displayed when the program starts, open the Camera List
in MxEasy (e.g., under the menu item Camera>Add Cameras). Click on the + button
to the lower left of the list. The Add MOBOTIX Camera window opens.
2. Enter the DynDNS name for the router in the Address field and the correspond
-
ing Port for the Door Station (as defined in the router).
Data from the example above:
• Address: fritz-mueller.dyndns.org
• Port: 19801
3. Now enter the user name and password for the Door Station:
• User name: admin
• Password: [supervisor PIN]
4. Click OK to confirm and finish. If everything is set up correctly, the network
status of the Door Station automatically switches to accessible (symbolized by a
green dot without lock) and MxEasy displays a live preview image.
Step 6: Setting Up SSL Encryption
SSL encryption means that data sent to and from the cameras is always transmitted in
an encrypted format. This technique makes the recording of data and spying on access
data (nearly) impossible. To activate SSL encryption on the camera, proceed as follows:
1. Open the Properties window via the Camera> Edit Cameras menu.
2. Or: Open the Camera List via the Camera> Show Cameras menu. Open the
shortcut menu for the desired camera. Click Edit. The Properties window opens.
Camera name
Camera port,
may be on router
User name and
password for
camera access
fritz-mueller.dyndns.org
IP address or
DynDNS name