Specifications

58/164
S15 Camera Manual: Product Overview
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
1.4 Available Accessories
1.4.1 Extension for Sensor Module
Order No.: MX-S15-OPT-MK-EX
Each of these extensions increases the installation depth by 40mm. They can be mounted
directly onto the sensor modules themselves or onto existing extensions.
1.4.2 Ceiling/Wall Installation Set
Order No.: MX-S15-OPT-MK-CW
This set contains everything that is needed to attach a
sensor module to a ceiling or wall using 15° wedges:
One extension (MX-S15-OPT-MK-EX), two 15° wedges
(white, black), two wedge washers and an additional
nut.
Out of the colored wedges, use the most suitably-colored
wedge for the visible area and the other one for insert-
ing on the rear.
1.4.3 Connection Cable for Sensor Module
Order No.: MX-FLEX-OPT-CBL-05/1/2/3
This cable, which is up to three meters long (three meters
only allowed for 6MP image sensors), connects one
sensor module to the S15D. The seals integrated into
the cable combine with the bayonet catch on the sen
-
sor module and the sealed port of the S15D to provide
IP65-compliant weatherproofing. Also included are two
hinged ferrites that are attached at a distance of 10cm to
the base module and the sensor module after installation.
1.4.4 MiniUSB Cable to MiniUSB (Straight/Straight or Straight/Angled)
Order No.: MX-CBL-MU-STR-05/2/5 (Straight/Straight)
Order No.: MX-CBL-MU-EN-STR-05/2/5 (Straight/Angled)
With this cable, which is up to five meters long, MOBOTIX
add-on modules (MX-232-IO-Box, ExtIO, CamIO) can be
connected directly to the S15.
Do not bend the
sensor cables
Cables with straight
plugs can be used for the
S15 on the camera only