Specifications

108/164
S15 Camera Manual: Operating the Camera
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
3.1.2 Automatically Using MxControlCenter or MxEasy
You can set up the cameras network parameters using the free video management
software MxControlCenter or MxEasy (see
Section 3.2.3 and Section 3.2.4 ). You can also
use one of these applications to automatically configure the network parameters of a
MOBOTIX camera that is not operating in the same IP address range as the computer.
Benefits
– You can connect the camera directly to the target network.
– The camera does not need to be physically accessible, that is, it can remain
mounted to a pole, for example.
– The camera can be configured to automatically receive an IP address (optional).
– The network parameters can be manually set (optional).
– You do not need to access the camera software.
Requirement
– Either MxControlCenter or MxEasy must be installed on the computer.
MxControlCenter con-
trol room software
(free download from
www.mobotix.com
MxEasy
(free download from
www.mobotix.com)