Specifications

58/156
Q25M Camera Manual: Installation
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
2 INSTALLATION
The Q25M is primarily designed for installation on walls or ceilings. The supplied L12 180°
lens captures the entire room, practically from wall to wall and from floor to the ceiling.
See
Section 2.2, «Mounting the Camera Without Accessories» and the following sections
for information on the dierent installation options; the drilling templates can be found
at the end of the manual.
2.1 Preparing the Installation
Before mounting the MOBOTIX Q25M, the following questions should be answered:
1. Where will the camera be mounted?
Mounting to a ceiling or wall; see
Section 2.1.1 and Section 2.1.2
2. Which other mounting options are available?
On-wall mounting, in-ceiling mounting, vandalism protection, wall mounting, pole
mounting, see
Section 2.1.3
3. How is the camera connected to network and how is power supplied?
MX-NPA-PoE or other PoE components (IEEE 802.3af), see
Section 2.1.4
4. How are the connections furnished from the building?
Wall outlets, see
Section 2.1.5
5. What cabling considerations are necessary?
Wiring, see
Section 2.1.6 and Section 2.9
The following sections contain a brief answer to each of these questions, as well as refer-
ences to the relevant sections in this manual. For more information on the MOBOTIX Q25M
and available accessories, please see www.mobotix.com.
Wall installation with
On-Wall Set 10°