Specifications

52/156

Q25M Camera Manual: Product Overview

www.mobotix.com • sales@mobotix.com

1.4.15 MX-GPS-Box

Order no.: MX-OPT-GPS1-EXT

The MX-GPS-Box primarily serves as a high-precision time

source for systems without an Internet connection. In addi-

tion, it can provide triggering based on GPS events (reaching

or moving away from a speciﬁed position; exceeding or

not reaching a speciﬁed speed). This interface box can be

attached to all MOBOTIX cameras with an MxBus interface.

The MX-GPS-Box is equipped with the same compact housing as the other interface

boxes (protection class IP65, –30 to +60°C/–22 to +140°F). This interface box should not

be installed inside of other wall mounts, but on the exterior of the building with a large

section of open sky above it. This ensures the best possible reception from GPS satellites

and thereby the highest possible accuracy of the received GPS data. The maximum length

of the MxBus wiring (0.8mm diameter wires) is 50m/55yd.

1.4.16 MX-232-IO-Box

Order no.: MX-OPT-RS1-EXT

This box provides the signal inputs and outputs as well

as the RS232 (serial) interface. It replaces the connections

that were handled on the older camera models via a

D-Sub 15-HD connector. The MX-232-IO-Box (protection

class IP65, –30 to +60°C/–22 to +140°F) can be attached

to all MOBOTIX cameras with an MxBus or USB interface. The maximum length of the

MxBus wiring (0.8mm diameter wires) is 50m/55yd. If the MiniUSB connector is used,

the maximum cable length is 5m/16ft.

1.4.17 ExtIO Expansion Module

Order no.: MX-ExtIO

The device, which is suitable both for on-wall and in-wall

installations, contains a powerful speaker, microphone,

infrared motion sensor, ambient temperature sensor, two

input and two output contacts and two illuminated keys. It

is ideal for door communication, elevators, access control

systems, etc. The ExtIO is suitable for use as direct con-

nection to the S15 via a MiniUSB cable (max. 5m), which

can be ordered separately, or as a network connection

via the PoE switch.