Specifications

5/156
Contents
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
2.9.6 Connecting a USB Cable 106
2.9.7 Connecting a Two-Wire MxBus Cable 107
2.9.8 Variable PoE 108
2.9.9 Camera Startup Sequence 109
3 Operating the Camera 110
3.1 Manual and Automatic Operation– Overview 110
3.1.1 Manually Using a Computer in the 10.x.x.x IP Address Range 111
3.1.2 Automatically Using MxControlCenter or MxEasy 112
3.1.3 Automatically Using DHCP 113
3.2 First Images and the Most Important Settings 114
3.2.1 Manually Setting Up the Network Parameters in a Browser 114
3.2.2 First Images and the Most Important Settings in the Browser 116
3.2.3 First Images and Network Parameter Configuration in MxControlCenter 118
3.2.4 First Images and Network Parameter Configuration in MxEasy 123
3.2.5 Starting the Camera with the Factory IP Address 126
3.2.6 Starting the Camera with an Automatic IP Address (DHCP) 127
3.3 Virtual PTZ and Full Image Recording 128
3.3.1 Preparing the Virtual PTZ Function 128
3.3.2 Full Image Recording 130
3.3.3 Special Q25M Configuration in the Browser 132
3.4 MicroSD Card Recording 139
3.4.1 Introduction 139
3.4.2 Formatting the MicroSD Card 141
3.4.3 Activating MicroSD Card Recording 142
3.4.4 Accessing Data on the MicroSD Card 143
3.4.5 Deactivating Card Recording 143
3.4.6 Using a MicroSD Card in a Dierent MOBOTIX Camera 144
3.4.7 Limitations on Warranty When Using Flash Storage Media 144
3.5 Configuration in the Browser 145
3.5.1 Overview 145
3.5.2 General Browser Settings 147
3.6 Additional Notes 149
3.6.1 Weatherproofness 149
3.6.2 Password for the Admin Menu 149
3.6.3 Permanently Deactivating the Microphone 149
3.6.4 Starting the Camera with the Factory IP Address 149
3.6.5 Resetting the Camera to Factory Settings 150
3.6.6 Activating Event Control and Motion Detection 150
3.6.7 Deactivating Text and Logo Options 150
3.6.8 Deactivating the Camera Reboot 150
3.6.9 Browser 151