User manual

95
© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
95/126
Configuring An IP Video Door Station (T24)
Indicate which door sensors exist in the system and which terminal connectors are
relevant. This is important to receive correct status displays (door open/closed/locked)
in MxEasy.
If you do not know whether and where door sensors are connected, simply try out
the dierent options and check them using the the status display.
Automatic configuration enabled:
After successful initial operation and configuration of a T24 system, MOBOTIX recom-
mends preventing automatic reconfiguration by door camera to protect the system from
unwanted manipulation from outside. To do this, the checkbox must remain deactivated.
4. Click on OK to confirm.
4.5.2 Setting Up The Intercom Mode On Door Stations
For testing purposes, you can set dierent sound quality modes for two-way communica-
tion intercoms on the Door Station. To do this, open the “Door Station“ tab via the Tools |
Preferences menu.
1. Choose the desired mode:
The standard setting is the “Hands-free talking“ mode. The sound settings cannot
be adjusted in this mode.
In the “Headset“ and “Limited“ modes, you can adjust the sound settings.
To do this, open the “Audio“ tab via the Cameras | Camera Options menu. Enter
the settings that you want and then click on OK to confirm.
Select “Limited“ mode in a loud environment where two-way intercom communica-
tion cannot really take place, and where only listening and speaking are viable.
2. Click on Apply and confirm by clicking on OK.