User manual

93
© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [e-mail]
93/126
Configuring An IP Video Door Station (T24)
• Automatically acknowledge alarms after: This setting allows you to specify the time
after which MxEasy will automatically acknowledge alarm messages from integrated
cameras. Automatic acknowledgement may also end a still active alarm sound.
Doorbell Notification
These options refer exclusively to the T24 Door Stations
• Automatically show ringing camera in main view: When this option is activated, the
live image of a door camera is automatically shown in the main window whenever
a visitor rings the doorbell at the Door Station.
• Restore application if minimized: If this option is activated, the minimized program
window is restored when a visitor rings the doorbell at the Door Station.
• Show red chime on doorbell: If this option is activated and the doorbell is rung on the
Door Station, a flashing red chime appears. You can deactivate the chime by clicking on it.
• Play sound on doorbell: When this option is activated and a visitor rings the doorbell
on the Door Station, the selected alarm sound will be played. The bell sound ends
when two-way intercom communication begins.
Camera Sequencer
• Camera Sequencer Interval: When the camera sequencer is activated, you can use
the sequencer interval to define how long the display will last before switching to the
image of the next camera.
4.5 Configuring An IP Video Door Station (T24)
The settings on the door camera are usually configured when the door camera is integrated
with the MxEasy Wizard. This can also be adjusted later, of course. The doorbell behavior
and the door station hardware can be configured in the Door Station Options. You open
the Door Station Options by opening the Camera| Door Station options menu or clicking
on the Door Stations options button.
4.5.1 Configuring Door Station Options
Changing Doorbell Behavior For Remote Stations
Grandstream videophones are typically used as remote stations for a Door Station. The
videophones are automatically integrated into the system during the PC-free auto-configuration
process. You can change the settings for doorbell behavior for every individual remote station
(videophone and PC with MxEasy) that you have configured with the MxEasy Wizard in the
course of integrating the door camera.
1. Select the “Doorbell“ tab.
2. Select the contact number and/or bell for which an action profile will be entered.