User manual

© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [e-mail]
88/126
MxEasy User Manual: System Configuration
Flashing Patterns For Each Setting
Settings LEDs Color Flashing Pattern LEDs Cameras
Show recording
state
Alarm:
1, 5
• Continuous recording: On
• Event recording: Neg. flash every 3 s
• Not armed, o: O
• Armed, waiting: Flash every 3 s
•
Critical error: Flashes synchronized with
power LED
M12
D12,
D14
Power:
0
• OK: Always on
• Critical error: Neg. flash every 3 s
• Critical error: Blinking
Q22M,
Q24M,
D22M,
D24M,
M22M,
M24M
Show camera
access
Alarm:
1, 5
• Continuous recording: On
• Event recording: Neg. flash every 3 s
• Not armed, o: O
• Armed, waiting: Flash every 3 s
•
Critical error: Flashes synchronized with
power LED
Power:
0
• Always: Double flash every 3 s
For more information on the LED blinking patterns of MOBOTIX cameras, see the Section
“
LED Signals And LED Configuration “ in the Software Manual and in the Camera Manual
of the respective camera model.
4.3.3 Connection Settings
You can also set the parameters for communications with
external servers in this dialog box, for example, if you
need to send e-mails.
• DNS server: If you have cameras integrated to the network
via a manual IP address, you can enter the IP address of
the DNS server used by your network here. MxEasy will
automatically suggest the DNS server that your computer
is currently using (the Same as this computer option).
A DNS server must be entered in a camera in order for
the Time Server, VoIP and E-Mail functions to work, if
the respective IP addresses are
not known.
• Use secure connections (HTTPS/SSL): If necessary,
you can activate encryption for all data transferred via
HTTPS between MxEasy and the cameras. We strongly
recommend using this option for security-related applica-
tions. Note however that the SSL encryption will place
a higher load on the network bandwidth, which can
lead to a reduction in the camera frame rate.