User manual

87
© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [e-mail]
87/126
Adjusting Camera Settings
4.3 Adjusting Camera Settings
Several of the settings for the cameras can be centrally managed using MxEasy. To do this,
open the camera options in the Cameras| Camera Options menu or with the Camera
Options button.
4.3.1 Audio Settings
You can make the most important sound settings for the
camera in this dialog box.
• Activate microphone, adjust sensitivity
• Activate speaker, adjust volume
• Add sound files (if supported by the camera)
• Record sound files yourself
For additional information, see the Sections “ Microphone
and Speaker “ and “ Sound on Event “ in the Software Manual .
4.3.2 LED Settings
The LEDs of the cameras can be used to signal certain
functions and statuses. You can assign selected flashing
patterns to particular camera actions and functions in
this dialog box.
• Show recording state: The camera LEDs blink if an event occurs and recording takes
place.
• Show camera access: The camera LEDs blink whenever a camera is accessed, for
example, when the configuration is changed.
LED Flashing Patterns
LED State Flashing Pattern Graphic
On LED is always on
O LED is o
Blinking LED is o, blinks slowly
Flash LED is o, blinks rapidly
Negative flashing LED is on, flashing o