User manual

53
© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [e-mail]
53/126
Image Sections And Virtual PTZ Features
• Click on one of the numbered position buttons, e.g., Position2, and hold down the
mouse button (about three seconds) until you see the message
View 2 stored.
The PTZ view is stored on position button 2. The position button is bolded so that you
know it has a view stored in it.
• The number keys on your computer can also be used to store positions: When you
press and hold down a number key (for example,
2), this view is stored (View10 is
stored by pressing
0).
•
To load a stored position, click briefly on
the corresponding button or briefly
press the corresponding key (e.g., 2 for
position 2). The corresponding view is
shown (
0 is used to call up position 10).
•
If you have a joystick with buttons installed
on your computer, you can also use these
buttons to save frequently-used views.
You can use this feature to save up to ten
preset views for each camera and activate
them as needed.
For MOBOTIX Hemispheric models with an
L11 lens (360° allround view), you can select
additional options in the shortcut menu of the
Activate PTZ button. These additional options are only available for Hemispheric cameras.