User manual

27
© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [e-mail]
27/126
Using MxEasy For The First Time
2.3.3 Special Case: Integrating An IP Video Door Station (T24)
MxEasy can also be used in combination with an IP video Door Station to use a PC as an
additional video two-way communication intercom and easily secure entrances. To do this,
the IP Video Door Station must first be integrated into MxEasy. When you start MxEasy for
the first time after connecting the door camera, the MxEasy Assistant automatically begins
to search for new cameras and displays all cameras detected in a list. This will include the
door camera in the T24 IP Video Door Station.
Selecting A Door Camera
1. Proceed as described in
Section 2.2.2 “Selecting And Connecting New Cameras .“
If the door camera is password-protected (status: Authentication required in the
camera list) and you have not yet unlocked the camera directly in the camera list,
then the authentication window will now open.
Authenticate
1. Enter the user name and password and confirm by clicking on OK. The “Select
Integration with MxEasy“ window opens.
Select Integration with MxEasy
Typically, you will have already conducted an automatic
configuration of the T24 Door Station before integrating
the door camera into MxEasy (see the T24 System Manual,
Part 2, Initial Operation And Configuration). If this is the
case, the system will detect this automatically and open the
“Select Integration with MxEasy“ window with the following
option fields (see the image at right). The Keep automatic
configuration settings option field is automatically selected.
1. Keep this setting.
2. Click on the Continue button. The “Configure Access
Mode“ window opens.
If you have not yet conducted an automatic configuration,
then the “Select Integration with MxEasy“ window opens
with the following option fields (see image). In this case we
recommend Complete Integration.
1. Select the Complete Integration option.
2.
Click on the Continue button. The “Configure Access
Mode“ window opens.
Configure Access Mode
1.
Proceed as described in Section 2.2.2 “Selecting And
Connecting New Cameras .“ The “Change camera
access“ window opens.