Specifications

www.mobotix.com

The HiRes Video Company

Note that the HiRes/LoRes/Audio Only presets can be selected in the App at any time via the middle button of

the three round buttons at the top left of every view.

The HiRes and LoRes settings do not change the camera’s internal image settings, which means that they do not

aect any other remote stations connected to the same video sources. They only specify how the camera is to

transmit the video feed, which may well be at a dierent frame rate and resolution to the camera’s internal settings.

These settings apply to both the viewing of live feeds as well as the playback of video recordings.

7.3 Maximum Number Of Events And Maximum Time Range

Here, you can specify the maximum number of event preview images that are to be transferred from the camera’s

memory to the App (and counted by the red event counter) after the App has been switched o for some time

(that is, it is not running in the background). The higher this value, the longer loading will take when the App

is opened again. If the number of event preview images loaded from the camera is less than the maximum

value, it simply means that less events occurred in the speciﬁed time range.

Regardless of these settings, you can always use the Events view to load in multiple batches of preview images

to access all of the recordings made on the connected video sources.

7.4 Audio

Here, you can change the volume of the audio signal that the App transmits to the video source. The default

setting of 70% (the value increases towards the right) is optimized for intercom connections. You only need to

change this setting if you are in a very loud or very quiet environment.

7.5 Hands-Free Talking And Push-To-Talk

Hands-free talking is enabled by default. If your mobile device is in a noisy environment, push-to-talk can be

a useful alternative (push-to-talk: Talking only possible when Talk and Listen buttion is pressed).