Specifications

www.mobotix.com
22
APP
Adding Video Sources
6 ADDING VIDEO SOURCES
6.1 Adding Cameras Connected To A Local Wi-Fi Network
If your MOBOTIX video sources are already connected to your local Wi-Fi network and are powered via PoE,
they can be integrated into the App very easily.
1. Install the MOBOTIX App on your mobile device (download from the App Store).
2. Log the mobile device on to the Wi-Fi network.
3. Open the MOBOTIX App. A startup screen appears with two buttons. The value of the red counter on
the Go! button (here: 3) indicates how many MOBOTIX video sources were detected in the local wireless
network. If there are no video sources connected to the network, you can also run the App in demo mode
(this uses 5 demo clips).
4. Tap ”Go!”, followed by ”Select camera...” and choose an entry from the list. By default, the cameras are
listed as follows: ”mx + default IP address”. You can change these names in the App so it is easier to
identify your video sources.
5. After you have tapped on a video source, you need to enter its user name and password. By default,
MOBOTIX cameras have the following administrator access details (they should be changed if at all
possible to provide better security, for example, with MxEasy).
User name: admin
Password: meinsm
The following administrator access details apply if there is an IP Video Door Station that has been
auto-configured for operation.
User name: admin
Password: current Super PIN (8–16 digits)
6. Now tap ”Connect”. The MOBOTIX App opens and displays the Live view of the selected video source.
It is now ready for use.