Specifications
www.mobotix.com
15
The HiRes Video Company
Individually Adjust Predefined Image Sections
Adjust the predefined image sections individually if the one you require is not automatically available. The
MOBOTIX App oers a special PTZ mode for such cases, which is activated by tapping and holding the Zoom
Control (position information is indicated by a red dot). Select the image section that you wish to change, which
you can move and zoom in and out of with the zoom control with one finger. You can save the new image
setting by tapping and holding the image section control button. Be aware that any „camera movements“
undertaken in this special PTZ mode will also be visible to all other users of this camera, as you are changing
the image view on the camera itself.
Usage of the PTZ functions is further described on the App‘s „Zooming and Changing Image Sections“ help
page (available in the Live view)
Notes
Even with a non-hemispheric camera it is also possible to transfer an individual image section to the App
in display mode, instead of the default use of the full image on the sensor. The selection of image sections
in the chosen display mode in this case gives you access to areas that would not be visible otherwise.
If the full image recording has not been enabled for the camera elsewhere (such as via MxEasy or a
browser), recording will only capture the video source selection currently selected in the special PTZ mode.
If full image recording is enabled, the entire camera image is captured at all times. (This is an important
advantage of MOBOTIX cameras).
2.5 Reload Button
You can find the Reload button in the top right in every view. Pressing this button once will cancel the current
connection to both the Live and Player views of an individually selected camera or the Events view of all selected
cameras and reload the connection.
This button is handy when an image is taking too long to load or the App is reacting too slowly to a command
Tapping and holding the Reload button synchronizes all cameras connected to the App automatically (we
recommend doing this when you require access the latest alarm messages).
You should also set the bandwidth to „LoRes“ or „Sound Only“ if you suspect that the delay is the result of a poor
connection. This will also limit the volume of data being transferred to the network. The reload function will be
performed automatically every time you switch the setting.
Shaking The Mobile Device
Instead of pressing the Reload button, you can also shake your iPhone, iPad or iPod touch briefly to initiate
reconnection.
Standard
POI
Overview
Detail Top Bottom Left Right