User manual




www.mobotix.com • [e-mail]
 
If necessary, you can set up one administrator to be used for all MOBOTIX cameras con-
nected using MxEasy (the  menu command, Camera Access button).
This will replace the default administrator (User Name: admin , Password: meinsm ). MxEasy
then accesses all connected cameras using the new user name and the new password.
Setting up a new administrator not only provides quick and reliable protection against
unauthorized access, it also blocks browser access to the Guest screen (;
for more information, see Section 5.4
Users, User Groups, Passwords, Supervisor Mode
in the
software manual .
Caution
A password set up in MxEasy for the global access level will never be shown for
security reasons. Make sure that you store this password in a secure place.
If no user name and password have been entered, MxEasy uses the factory defaults
(user
admin, password meinsm). This automatically enables public access to the
Guest screen via a browser window.
If you do not want to use a camera with MxEasy and want to use it elsewhere, you
should first remove the camera from MxEasy (the  menu
command) and then reset it to the status it had before it was connected to MxEasy
(the Reset button). If you do so, any modified user names and passwords for the
administrator will be reset to their default settings.