User manual
www.mobotix.com • sales@mobotix.com
If the cameras are connected to the Internet, you can select a time server from the drop-
down menu. You can also enter a time server in the local network if one is available. If
neither a time server on the Internet nor a local time server is available, you should specify
one of the cameras connected to MxEasy as the master camera for the purpose of time
synchronization. Doing so will at least ensure that all cameras remain synchronized with
each other and hence allow saved video sequences to be played back in a synchronized
manner.
The time display in the title bar of the main window will blink if the system time of an active
camera (Live view) in the main window deviates from the system time of the computer by
more than 15 seconds. In this case check the computer to see if it is also synchronized
with a time server. Try to set up the same time server for both the computer and the
MOBOTIX cameras.
• No SIP user data is required if telephone
calls are to be made within the local network only (for example, to softphones
installed on computers).
• Enter the user data that you
received from your SIP provider upon registration into the appropriate fi elds (
, , and ). If the MOBOTIX cameras are set
to automatically obtain their IP addresses via DHCP, then make sure that a valid DNS
server is entered in the MOBOTIX cameras (the Connection tab).
For additional information, see Section 7.7.6
Phone Call
and Section 7.8.4
Phone Profi les
in the
software manual
. For detailed information on all telephony features of the MOBOTIX
cameras, see Chapter 9 of the
software manual
.