User manual




www.mobotix.com • [e-mail]
 
 
 Overview
Many of the settings for the connected MOBOTIX cameras can be centrally managed
using MxEasy (the Camera Options button).
Select the camera whose settings you would like to change (the Next Camera button).
The live image from the camera you selected will be displayed as a preview image to
help you identify the specifi c camera you want.
Click  or OK and your settings will be sent to the selected camera or, if the 
checkbox is checked, to all the cameras connected to MxEasy.
Note: No preview image will be shown if the  checkbox is enabled.
•
 You can make the most important audio settings for
the camera in this dialog box. Here, you can set the volume of the camera speaker
and the sensitivity of the camera microphone, for example. You can also upload an
audio fi le to the camera and activate it for alarm notifi cations, for example.
•
    The LEDs of the MOBOTIX cameras can be used to
signal certain functions and statuses. For example, the top two LEDs fl ash when the
camera detects an event. You can assign selected fl ashing patterns to particular
camera actions and functions in this dialog box.
•
  You can enter the IP address of a DNS server in
this dialog box. You are required to enter a DNS server if you would like to receive
alarm notifi cations online via e-mail or VoIP phone call. In addition, you can also
activate encryption for all data transferred to and from the MOBOTIX cameras (HTTPS/
SSL), if required.