User manual




www.mobotix.com • [e-mail]
 Connections
•  If you connect to the Internet in your local network via a proxy server,
then the proxy settings need to be entered in the MxEasy program settings. This
is necessary if MxEasy accesses the Internet for purposes such as downloading
software updates (see
Section 4.5, Software Update ).
•  If a proxy server has been entered, access to all network
devices will occur over this server even if the device is a remote camera or a local
network camera. This may result in slower access to the local camera or even prevent
access entirely. You should therefore enter the IP addresses (or symbolic names) of
all local network devices in the  field. You can also specify a
range of addresses (for example,
192.168.*).
•  This setting allows you to optimize the retrieval and display
of the live images from the camera in MxEasy. Depending on the setting you select,
the camera images will always be retrieved and displayed in MxEasy either at full
resolution and full frame rate or at reduced resolution (Preview feature) and reduced
frame rate (for more information, see Section 3.6, Bandwidth Management ).
 Behavior
•  If this option is enabled, the
live image of a camera connected to MxEasy, but not visible in the main window or
the camera windows will automatically be shown in the main window of MxEasy in