User manual
www.mobotix.com • sales@mobotix.com
•
This setting is recommended for modem or ISDN connections.
• Main window: The live images of the active camera in the main window are
shown at full resolution, but at a lower frame rate (four frames per second).
• Camera windows: The images from the cameras displayed in the small camera
windows are displayed at a lower resolution and lower frame rate (four frames
per second) using the Preview feature.
•
This default setting is generally recommended for wi-fi connections or Ethernet net-
works with reduced bandwidth (for example, 10BaseT, Powerline adapter, two-wire
media converter, etc.).
• Main window: The live images from the active camera in the main window are
displayed at full quality (full resolution and full frame rate).
• Camera windows: The images from the cameras displayed in the small camera
windows are displayed at a lower resolution and lower frame rate (four frames
per second) using the Preview feature.
•
This setting is recommended for Ethernet networks with unlimited bandwidth (for
example, 100Base-T/100 Mbps, 1000Base-T/1 Gbps, fast draft-N compliant wi-fi
with good signal strength).
• Main window, camera windows: Both the live images from the active camera in
the main window and the images from the cameras shown in the small camera
windows are displayed at full quality (full resolution and full frame rate).
The
always occurs at full resolution (maximum image
quality) irrespective of the display quality of the camera’s live images.
The live images from the active camera in the main window are always displayed at full
resolution.
If the MxEasy program window is minimized in the task bar or dock, all live images will be
automatically retrieved at a low frame rate (four frames per second). This is the reason why
the live images briefly appear at a lower resolution when you restore the program window.