User manual
www.mobotix.com • sales@mobotix.com
Only the cameras that are activated in the Camera Overview will be shown in the Sequencer.
The Sequencer will cycle through the camera images in the same order in which they
appear in the Camera Overview. You can change the display order by moving the cam-
eras with your mouse (for more information, see
Chapter 2.3, Displaying Live Images
).
The IT and Secure models of the
and
MOBOTIX cameras and the
ExtIO
and
CamIO
expansion models that are compatible with all MOBOTIX IT and Secure models
are equipped with signal inputs and outputs. The signal inputs are capable of receiving
a door bell signals, for example, and the signal outputs can transmit the command to
open a door (or a gate) to a locking system (door opener).
This means that MxEasy, when used in conjunction with MOBOTIX cameras, can serve
as a fully equipped and fl exible door intercom system with video and audio transmission.
Press the Microphone or button to use the intercom (audio transmission).
To open a door or turn on the light, press the or button. You can also play
back a voice message that has been saved in a MOBOTIX camera (the button).
• The audio from the computer microphone will be transmitted to the
camera loudspeaker for as long as you press and hold this button. This works the
same way as if you were to make an announcement in a soccer stadium or on a
train platform or to use a handheld transceiver or a door intercom.
• Press and hold this button to hear the audio from the camera micro-
phone over the computer loudspeakers. This feature allows you to use MxEasy as
a door intercom, for example.
• You can activate a door opener connected to a MOBOTIX camera (or a con-
nected ExtIO or CamIO) with this button via signal output 1. The signal output/door
opener will deactivate automatically after fi ve seconds.
• This button allows you to enable and disable a device (for example, the light
for the door intercom) connected to a MOBOTIX camera (or a connected ExtIO or
CamIO) via signal output 2. Click the button once to switch on the light and click
again to switch it o .
• Click this button to play back an audio fi le that has
been saved in a MOBOTIX camera on the loudspeaker of that
camera. You can also play back an individual voice message
that has been previously recorded and saved there using the
camera software. You can select one of the audio fi les that is
available on the camera displayed in the main window from the
pop-up menu of the button (right-click). MxEasy will remember
the audio fi le you selected for each specifi c camera.
• Click this button to increase the loudspeaker volume on the computer
running MxEasy.