User manual







www.mobotix.com • sales@mobotix.com

•

 Click this button to activate e-mail notiﬁ cation from the MOBOTIX

camera. Click the button a second time to deactivate the feature.

This function can be used to document incoming vehicles in a corporate parking lot

for later evaluation. E-mails are better for messages that do not require immediate

action. This function makes it possible to send images via e-mail even if no recording

medium is available (for example, an external data server).

Speciﬁ c settings are necessary for each notiﬁ cation mode, for example, the name of the

audio ﬁ le, a phone number, an e-mail address and/or additional basic settings of the

MOBOTIX camera. MxEasy detects whether valid settings have been made and if neces-

sary, it prompts you to make the necessary settings. For more information on camera

, see

Section 4.1.2, Audio Settings

Section 4.1.6, VoIP Settings For Phone Calls

and

Section 4.1.7, E-Mail Settings

You can reselect an audio ﬁ le, a telephone number or an e-mail address that was set

previously using the Edit menu command in the pop-up menu of one of the time periods

or the corresponding button (right-click the time period or the button on the lower edge

of the MxEasy program window).

For additional information, see Section7.7

Actions and Messages

in the

software manual

 

1. Activate the camera that should be assigned a particular task. The active camera

is always the camera displaying the live image in the small camera window in the

upper right-hand corner of the Alarm Planner.

2. Click the Next Camera button until the desired camera is located in the upper

right-hand camera window.

3. Assign the camera to the desired time periods with the corresponding notiﬁ cation

characteristics.

Activate the settings for the camera by clicking . Activate the  checkbox

and then click  to simultaneously assign all cameras to the same time period.

Hint

First carry out the settings that apply to all cameras (the  checkbox, for example,

activation and recording) and then carry out the settings for the individual cameras.