User manual
www.mobotix.com • sales@mobotix.com
• If you want to shrink or enlarge a time period, drag the
edge of the time window accordingly using the mouse. A appears
automatically when the mouse pointer hovers over the edge of the window. You can
also use the weekday and time fi elds (in the lower section of the time planner) to
adjust the active time period down to the minute.
• Select the window with the mouse and press the
delete
key
on the keyboard (or right-click the time period and choose Remove in the pop-up
menu) to delete a time period.
•
The areas that are not assigned to specifi c time periods
(times and days) fall into a collective time period. This period can also be assigned a
particular recording mode, alarm sensors and alarm notifi cations. Right-click outside
a defi ned time period in the calendar fi eld and make the desired settings using the
pop-up menu (see following sections).
Hint
Make the settings for the "background" time period fi rst. Then confi gure the indi-
vidual time periods.
You can set up a
using the pop-up menu of the time period
(right-click the time period). You can also set up
the recording mode using the pop-up menu of
the button for the recording (right-click the but-
ton on the lower edge of the MxEasy program
window). Make sure to assign it a recording
mode after activating the correct time window
in the Alarm Planner.
The camera continuously records data for
and for
,
the camera begins recording when an alarm sensor is triggered (see
Section 2.5.5, Setting
Up Alarm Sensors
). The time period will be colored either
red
(continuous recording) or
(event recording) depending on the recording mode you have selected. The record-
ing symbols in the pop-up menu are also colored either red or yellow.