User manual




www.mobotix.com • [e-mail]
  Views
You can select one of the views available for the selected MOBOTIX camera using the
pop-up menu of the  button.

•  The entire live camera image is displayed (without inset image).
•  The entire live camera image is displayed with lens correction. This
option is available for MOBOTIX cameras with L11 and L22 lenses.
•
 This option displays a small image from one camera sensor inset
in the large image of the other. This setting is available on MOBOTIX Dual models only.
•  This displays the entire live camera image as a small picture inset
in a large picture of the zoomed live camera image. You can move the zoomed-in
section of the large image (PTZ commands are available) by clicking in the smaller
live image.
•  This displays a small picture of the latest event image inset in a
large picture of the live camera image.
For more information on the di erent views available for MOBOTIX cameras, see Section
5.5.3
General Image Settings in the software manual .

•  The entire full image of the image sensor is displayed.
•  A corrected image is displayed. This image can be panned and tilted. This
is the factory default image setting for the Q camera models.
•  The images of four virtual cameras in each of the four cardinal directions
are displayed in the same view. You fi rst need to specify which direction is North.
All four views can be changed independently of each other using PTZ commands.
•  This displays the corrected image of an entire room (corrected 180°
panorama) from the left to the right wall. This view is available for the wall-mounted
MOBOTIX Q model only. The aspect ratio of the view is 8:3 (width to height).
•
 A 180° panorama view of the Northern half of the image is shown together
with a panorama view of the Southern half of the image with an aspect ratio of 4:3
(width to height). This view is available for the ceiling-mounted MOBOTIX Q model
only. Both partial views (North and South) can be changed independently of each
other using PTZ commands.
•
 This view combines the panorama view (see above) with two virtual
180° views of the entire room and provides a combination of the panorama view
(8:3) and two smaller views (with an aspect ratio of 4:3 each) in one large picture.
This view is available for the
 MOBOTIX Q model.