User manual




www.mobotix.com • [e-mail]
 
Proceed as follows to save defi ned image sections or PTZ positions:
•
Click the PTZ Views button to activate the position buttons in the function bar. MxEasy
displays the buttons of the position bar:
•
Click and  one of the numbered position buttons (position2 in the example) until the on-
screen message reads View 2 stored! to save a position. MxEasy now places a green marker on
the button to indicated that the position has been assigned and the button has been activated.
The number keys on your computer can also be used to save positions: When you
press and  a number key (for example, 2), this position is saved (position
10 is saved by pressing 0).
• If you would like to return to a saved position, press the corresponding button or
key (for example, 2 for position 2) briefl y. MxEasy displays the corresponding view.
(Position 10 can be activated by pressing 0.)
• If you have a joystick with save buttons installed on your computer, you can also use
these buttons to save frequently-used positions.
You can use this feature to save  in your MOBOTIX
system and activate them as needed.
Hinweise
The four cardinal directions can be selected in the pop-up menu of the 
Views button for MOBOTIX Q22/Q24 models with an L11 lens (360 degree panoramic
view). For more information, see the Confi guring the MOBOTIX Q22M sectionin the
Q22M camera manual .