User manual
www.mobotix.com • sales@mobotix.com
This unique name (for example, myhomenetwork.dyndns.org) is entered into
the router along with the registration information of the DynDNS provider (user name
and password). Each time the router's public IP address is reset by the provider, the
router registers this IP address with the DynDNS provider where the address is then
linked to your unique name.
• It is possible to access individual network devices (for example,
cameras) from outside the network using this router feature. A camera is assigned
to a port in the router. This port sends information to the internal network address
of the camera. In conjunction with DynDNS, you can access your first camera as
follows:myhomenetwork.dyndns.org:19901. MxEasy configures the connected
cameras automatically so that each camera can be used from outside the network
as a proxy camera.
For more information on these services, see Section10.3
Directly Accessing MOBOTIX
Cameras via the Web
in the
software manual
.
The following examples are possible ways to use MxEasy. They contain information about
the required components and setup for the individual scenarios:
• House with two cameras
• Gas station with five cameras
• with eight cameras
House With Two Cameras
This scenario consists of two MOBOTIX cameras that guard the entrance and the rear of
a house. When the homeowner is away for the weekend, these cameras use integrated
video and infrared motion detectors to detect unwanted movements around the house. In
case of an alarm, the video sequences are recorded in the cameras (SD card or internal
Flash storage). In addition, this triggers a call to the homeowner's cellular phone and
sends the images to the homeowner via e-mail.
MxEasy is the user interface in this example. Using this software, the user can conveniently
and easily set up and operate their MOBOTIX system.
Required Components
• 1
• 1 with L22 lens and outdoor wall mount
•
2 , 2 MOBOTIX Network Power Adapters (or 1 PoE switch)
• Switch with at least 5 ports