User manual
www.mobotix.com • sales@mobotix.com
MxEasy automatically detects new MOBOTIX cameras in the network. The Add Cameras
button will fl ash, indicating that the software has found a new video source. Click this
button to integrate the new cameras into your MOBOTIX system.
The Ethernet cable supplies the MOBOTIX cameras with power. You can use either MOBOTIX
PoE products or switches with PoE power supply in accordance with .
MOBOTIX PoE (Power over Ethernet) Products
• This power supply unit needs to be used in
conjunction with the Network Power Adapter. It is particularly suited to small instal-
lations and is available in di erent versions (for the U.S., Japan, U.K./Ireland, Australia).
• The Network Power Adapter, together
with the , is used to supply power to the MOBOTIX cameras over the
network cable. The integrated LED indicates whether or not the camera is being
supplied with power.
•
The Netpower Box supplies power
for up to four cameras and is connected between the switch and the MOBOTIX
cameras. This unit is particularly suited to smaller systems and can be easily attached
to DIN rails using the supplied clip. The integrated LED indicates whether or not the
camera is being supplied with power. The unit is extremely robust and durable
thanks to the fanless design of the Netpower Box.
• For larger systems, we
recommend the Netpower Rack for 8 or 20 cameras as they can be installed in
19-inch racks (2 rack units). The integrated LED indicates whether or not the camera
is being supplied with power. These units are also extremely robust and durable
thanks to the fanless design of the Netpower Racks.
For more information on MOBOTIX PoE products, see
www.mobotix.com
under
.
When purchasing switches with PoE power supply in accordance with , make
sure that the required number of ports is supported (in certain units, only some of the
ports are equipped with PoE power supply).