User manual
© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
98/144
MxEasy User Manual: System Configuration
Flashing Patterns For Each Setting
Settings LEDs Color Flashing Pattern LEDs Cameras
Show recording
state
Alarm:
1, 5
• Continuous recording: On
• Event recording: Neg. flash every 3 s
• Not armed, o: O
• Armed, waiting: Flash every 3 s
•
Critical error: Flashes synchronized with
power LED
M12
D12,
D14
Power:
0
• OK: Always on
• Critical error: Neg. flash every 3 s
• Critical error: Blinking
Q22M,
Q24M,
D22M,
D24M,
M22M,
M24M
Show camera
access
Alarm:
1, 5
• Continuous recording: On
• Event recording: Neg. flash every 3 s
• Not armed, o: O
• Armed, waiting: Flash every 3 s
•
Critical error: Flashes synchronized with
power LED
Power:
0
• Always: Double flash every 3 s
For more information on the LED blinking patterns of MOBOTIX cameras, see the Section
“
LED Signals And LED Configuration
“ in the
Software Manual
and in the
Camera Manual
of the respective camera model.
4.3.3 Connection Settings
You can also set the parameters for communications
with external servers in this dialog box, for example,
if you need to send e-mails.
• DNS server: If you have cameras integrated to the
network via a manual IP address, you can enter the
IP address of the DNS server used by your network
here. MxEasy will automatically suggest the DNS
server that your computer is currently using (the
Same as this computer
option). A DNS server must
be entered in a camera in order for the Time Server,
VoIP and E-Mail functions to work, if the respective
IP addresses are
not
known.