User manual

© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [e-mail]
96/144
MxEasy User Manual: System Configuration
Editing A Selected Camera
To edit a selected camera, open the shortcut menu or use the corresponding buttons:
• Add: Manual addition of one or several selected cameras that, for example, cannot
be detected automatically because they are accessed over the Internet.
• Edit: Same as
“Editing The Current Camera In The Main Window“ .
– User & password: Change the access data for one or several selected cameras.
– Properties: Change the access data and access type of a selected camera.
– Change network setup: Change the access data for one or several selected
cameras.
• Remove: Remove one or more selected cameras from MxEasy.
• Hide preview image: Hide and show the preview image.
• Show snapshot: Deactivate the livestream from a camera to save bandwidth.
• Activate camera search: Normally activated and shows that MxEasy automatically
searches for new cameras.
Activating/Deactivating A Camera For The Selected Environment
You can activate or deactivate cameras integrated to the system for the environment selected
in the option field. To do this, you activate or deactivate the corresponding checkbox for the
cameras in the first column of the Camera List.
4.2.4 Removing Cameras
Open the Cameras | Remove Cameras menu to remove a camera. Click on Remove to
remove a camera. Click on Restore and Remove to remove the camera and reset it to the
settings it had before it was integrated to MxEasy.
When removing cameras, MxEasy oers the option of resetting cameras to the settings
they had before being integrated to MxEasy. Note that the passwords provided in MxEasy
may also be reset, meaning that the old passwords will apply again.