User manual

© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [e-mail]
86/144
MxEasy User Manual: Using MxEasy
3.9.5 Searching And Playing Back Door Events
With the T24, you can also record and play back specific door events (such as when visitors
ring the bell or someone tries to open the door with an invalid PIN). In order to do this,
the alarm configuration must be set up to determine when and how events are recorded.
Proceed as follows to search and play back recorded events:
1. Open the Door Inspector under Camera | Door Inspector or by clicking on the Door
Inspector button.
2. Select the desired type of door event:
a. Ringing
This requires that recording (continuous or event-based) and the Door Station event
“Bell pressed“ are activated in the alarm configuration (see Section 3.5.2 “Automatic
Recording And Alarming, Selecting Events“).
– To see whether someone rang the doorbell while you were gone, click on the
Bell Pressed button. This opens an overview of all recordings triggered by a
doorbell ring.
– Double-click on the desired entry to play back the recording. The Player opens
in the bottom part of the overview area. Proceed as usual in the Player mode.
You can export the recording. Click on the Export button. The export list with the
recording opens. To perform the export, proceed as described in Section 3.7.2
“Exporting Recordings.“
b. Door Opened
This requires that recording (continuous or event-based) is activated in the alarm
configuration.
–
To see whether a door was opened, click on the Door Opened button. This opens
an overview of all recordings triggered by a door being opened.
– Proceed as described above to play back and export these recordings.
c. Movements